LOCTITE HY 4070 is a 2-part, transparent, cloudy colorless to pale yellow cyanoacrylate/acrylic hybrid universal bonder that provides a fast fixture at room temperature in bond gaps up to 0.2 in (5 mm). It works well on various substrates including most plastics, rubbers and metals. It is used where complete cure of excess adhesive as well as temperature and moisture resistance is required. Best application results are achieved with LOCTITE cyanoacrylate mixing nozzle (to suit HY 4070 and LOCTITE 3090).

  • Non-sag
  • Gel consistency prevents adhesive flow, even on vertical surfaces.
  • Gap filling up to 0.02 in (5 mm)
  • Temperature and moisture resistance

Item number HY 4070
Color Yellow
Mix Ratio, by volume
(Part A: Part B)
Cure Speed
(Fixture / Full Cure)
1 min. / 24hr
Gap Fill (Maximum) 5mm
Temp. Range (℃) 120°C

LOCTITE HY 4070 Technical Data Sheet

Previous Page