• The minimum spraying width can be 2mm wide.
  • The stainless steel body and shaft are surface-treated,that matched with a anti-corrosion and anti-wear shaft seal, which can be used for most materials.
  • Special needle nozzle design, external mixing of air and glue can use lower atomizing air pressure and reduce atomizing air consumption.
  • The spraying efficiency and less loss .
  • The nozzle can be easily changed when it damaged or jam-up.
  • Suitable for accelerators, lubricants, UV glues, fluxes (low viscosity), Ink (low viscosity), solvent, epoxy resin (low viscosity)
  • Size: 127mm*28.6mm
  • Weight: 230g
  • Needle tube nozzle aperture: 0.2mm, 0.15mm, 0.1mm inner diameter can be replaced as required
  • Glue contact material: 304 stainless steel shaft, Teflon & Viton shaft seal, passivated 303 stainless steel
  • Operating frequency: overthan 600 cycles/min
  • Applicable material viscosity: up to 5,000 Cps.

Previous Page